headerbg link to home page hire information button
  • link to astley hire
  • link to cleaning eqipment hire
  • link to air con hirer, cooler
  • link to heater hire
  • link to access cherry pickers, scissor liftslink to training
Building and site tools hire
power tools drill hire breaker hire
Engineering tools, lifiting equipment hire

Small (25mm) & Medium (35mm) Magnetic Based Drill Hire

Magnetic Base Drill Presses are commonly used for drilling fixing holes or holes for services in steel beams or columns. Universal beams UBs and Universal Columns UCs and other heavy duty steelwork can be drilled with relative ease. The magnetic base is clamps securely on to steel at any angle from horizontal to vertical and even upside down (Appropriate safety measures should be used if cutting upside down). For vertical and upside down cutting with the magnetic drill base, lubricating gel or paste should be used instead of normal cutting oil.

Normal twist drills can be used for smaller holes but the main advantage of these machines is the capacity to cut large diameter holes using broach cutters. Specially designed cutters in the magnetic drill press mill a circle through the steel leaving a hole and a round "slug". These annular cutters only cut material at the periphery of the hole as opposed to normal drills that cut the entire hole in to swarf. This results in less time and energy being required to cut large diameter holes.

Magnetic Based Drill

Rate per week (ex.VAT) before discount*:

Small Magnetic Based Drill - Code: DM5 - £86.00

Medium Magnetic Based Drill - Code: DM3R - £107.00

*Click to see all account benefits

Small & Medium Magnetic Based Drill Hire Applications

  • For drilling / cutting and boring holes into steel work.
  • In-situ drilling of bolt holes for initial steelwork erection or later modifications
  • Fitting plant and machinery to steel structures
  • To route services, pipes and cable through structures and bulkheads
  • Horizontal, vertical of overhead cutting / drilling
  • Controlled, accurate, precise drilling

Specifications for Small Size (25mm) Magnetic Based Drill

Max twist Drill Capacity 13 mm (No. 2 MT Morse Taper bit or chuck available)
Max. broach cutter (mm) 25 mm
Weight (kg) 11
Motor Power 700w
Motor Speed 550 rpm
Clamp Force 5880 N (600kg)
Supply voltage 110v
Consumables Broaching cutters, oil

Specifications for Medium Size (35mm) Magnetic Based Drill

Max twist Drill Capacity 13 mm (No. 2 MT Morse Taper bit or chuck available)
Max. broach cutter (mm) 35 mm
Weight (kg) 11.5
Motor Power 1100w
Motor Speed 450 rpm
Clamp Force 5880 N (600kg)
Supply voltage 110v
Consumables Broaching cutters, oil

 

NW, Manchester and U.K. availability

Hire is available across the NW North West including: Manchester, Lancashire and Cheshire. Hire covering the areas around Blackpool, Bolton, Bury, Preston, Leigh, Southport, Liverpool, Birkenhead, Ellesmere Port, Runcorn to Chester, Stockport, Salford, St. Helens, Wilmslow, Warrington, Wigan, Trafford, Glossop and Buxton. Postcodes: M, OL, SK, WA, BL, WN, PR, CW, CH & L.

arrow back to top